CELLER8 Max High-Intensity PEMF
CELLER8 Max High-Intensity PEMF
High-intensity PEMF for clinic or advanced home use. Full-body mat plus loops, 8,000-24,000 Gauss, 1-20 Hz. Available through Luma Health.
Inside the system
A high-intensity PEMF system with a full-body mat and targeted loops on one controller. 8,000 Gauss on the mat, 24,000 Gauss on the dual loops, solid-state hardware and a two-year warranty.
Specifications
- Mat intensity: 8,000 Gauss
- Dual loop intensity: 24,000 Gauss
- Frequency: 1–20 Hz
- Waveform: sine wave
- Chamber: solid state
- 12 programs; session length 1–20 minutes (adjustable up to 30)
- Intensity adjustable from 10% to 100%
- Controller: 58 × 24 × 34 cm, 20 kg
- Included mat: 132 × 52 cm, 10 kg (170 cm mat available)
- Dual small loop diameter: 18 cm; large loop diameter: 34 cm
- Voltage: 240V (110V on request)
- 2-year warranty on the device and applicators
What is in the box
The Max is a two-in-one system: a full-body mat plus targeted loops, run from one controller with two ports so two applicators can work at once.
- Controller
- Full-body mat (132 cm as standard; 170 cm available)
- Large loop
- Dual small loop (Helmholtz / butterfly coil)
- Applicator box
A chair applicator is a separate option if you want seated sessions instead of, or as well as, the mat.
How a session is run
Choose the applicator, pick a program, then run the session. The controller has 12 targeted programs plus three core modes — Accelerate, Relax and Recover. Time, frequency and intensity can all be set by you.
CELLER8 recommends starting low and slow: a few sessions a week at around five minutes and a lower intensity, then building toward daily use and up to 30 minutes if that suits you. Muscle twitching can happen at higher intensity. It is a sign the field is reaching motor nerves, not a measure of a better session.
Who it is for
The Max is built for clinics, performance rooms and advanced home setups that want high-intensity PEMF. Sessions are short compared with the lower-intensity CELLER8 system.
Take watches, phones, tablets and bank cards away from the field before you start. The pulses can interfere with electronics, magnetic strips and RFID chips.
Solid-state, not spark gap
The Max uses solid-state electronics rather than older spark-gap hardware. That gives a cleaner, more repeatable pulse and finer control of intensity, frequency and waveform. In normal use it does not need periodic servicing — keep it clean, dry, and used as directed.
Mat, large loop and dual loops
- Full-body mat: wide coverage for a whole-body session, plugged straight into the Max
- Large loop: one area at a time, such as a limb or the torso
- Dual small loop: two coils in parallel so the field stays even through the middle of a joint — useful for ankles, knees, wrists, hands, elbows and shoulders, including sandwiching a smaller area
Two applicators can run at the same time.
What is PEMF used for?
Block pain signals and work at the source of pain, rather than masking it alone.
Stimulate, activate, and re-energise your muscles.
Boost ATP cellular energy production and usability.
Faster tissue regeneration, circulation, and detoxification.
Stimulate osteoblast activity, supporting bone regeneration and density.
Rebalance your nervous system, improving stress and sleep quality.
Is the Max for clinic or home?
It is specified for clinics, performance facilities and advanced home rooms. Sessions are short and the field is strong, so it is not the same device as the portable CELLER8 controller-and-mat package.
Which mat size should I order?
The 132 cm mat is the standard package. A 170 cm mat and a chair applicator are available if you need a longer mat or seated sessions. We will help you choose.
Do I need to remove watches and cards?
Yes. CELLER8 recommends removing phones, tablets, watches, fitness trackers and bank or hotel cards before a session. The pulses can interfere with electronics, magnetic strips and RFID chips.
What is the warranty and servicing?
The device and applicators have a 2-year warranty. In normal use the Max does not need routine servicing. Keep it clean, store it dry, and follow the operating notes.
How do I buy the Max through Luma?
A short call is the starting point. We will confirm space, power (240V, 110V on request) and whether the Max or the lower-intensity CELLER8 package is the better fit.
