CELLER8 Max Chair
CELLER8 Max Chair
Seated full-body PEMF applicator for the CELLER8 Max. 800-8,000 Gauss, 1-20 Hz. Available through Luma Health.
Inside the chair
A seated full-body applicator for the CELLER8 Max. Up to 8,000 Gauss, 1-20 Hz, 12 programs. The chair does not produce a field on its own and only works with the Max.
Specifications
- Intensity: 800–8,000 Gauss
- Frequency: 1–20 Hz
- Application: full body, seated
- 12 programs
- Program length: 1–20 minutes
- Chair size: 105 cm (H) × 93–114 cm (L) × 67 cm (W)
- Weight: 20 kg
- Requires the CELLER8 Max controller; the chair does not produce a field on its own
What it is
This is a chair applicator for the CELLER8 Max. You sit for a full-body, high-intensity session instead of lying on the mat. Plug it into the Max controller and run the same programs you already use.
What it needs
The chair only works with the CELLER8 Max. It will not produce a field on its own, and it will not work with the portable CELLER8 controller.
If you already have the Max, this is an extra applicator. If you do not, start with the Max system, then add the chair if seated sessions suit the room.
How a session is run
Sit in the chair, connect it to the Max, pick a program, then set time and intensity. CELLER8 recommends starting low and slow. Sessions are typically minutes, not an hour. Remove watches, phones, tablets and bank cards before you start.
Size and weight
105 cm high, 93–114 cm long and 67 cm wide, at 20 kg. It is a dedicated seat, not the pelvic floor EMS chair and not a light bed.
What is PEMF used for?
Block pain signals and work at the source of pain, rather than masking it alone.
Stimulate, activate, and re-energise your muscles.
Boost ATP cellular energy production and usability.
Faster tissue regeneration, circulation, and detoxification.
Stimulate osteoblast activity, supporting bone regeneration and density.
Rebalance your nervous system, improving stress and sleep quality.
Does the chair work on its own?
No. The CELLER8 Max Chair only works with the CELLER8 Max controller. It does not produce a field on its own, and it will not work with the portable CELLER8 package.
Do I need the CELLER8 Max?
Yes. If you do not already have the Max, start there. The chair is an extra applicator for seated full-body sessions.
Is this the pelvic floor chair?
They are different devices. This chair is a PEMF applicator for the CELLER8 Max. The pelvic floor chair is an EMS system with its own console, used fully clothed for 28-minute sessions. One is not a substitute for the other.
What intensity does it run at?
800–8,000 Gauss, 1–20 Hz, 12 programs, sessions 1–20 minutes. Intensity is set on the Max controller.
How big is it?
105 cm high, 93–114 cm long and 67 cm wide, at 20 kg. A 15-minute call confirms whether a seated applicator is the right add-on for your Max.
